顶部菜单
产品详情
PGM-48钢轨打磨列车 Model PGM-48 rail grinding machine
PGM-48钢轨打磨列车是用于修正轨道波浪状磨损、轮轨擦伤,纠正轨侧面倾斜变形和修整轮轨接触面等各种由于车辆在钢轨上行驶而产生的钢轨缺陷,也可进行线路钢轨的预防性维修。整列打磨列车由1号车(控制车)、2号车(生活车)、3号车(末端车)组成。
Model PGM-48 rail grinding machine is used to correct the rail corrugation and wheel-rail burn, correct the track side tilting deion and repair the defect on wheel-rail contact surface and other rail defects caused due to vehicle running on rail. It can also be used for preventive maintenance of rails. The grinding machine is composed of No. 1 car (control), No. 2 car (living) and No. 3 car (end).

每个小车有8个磨头,全车共有48个磨头。打磨小车作业最小曲线半径为180m,当作业速度为7km/h时每遍去除金属量为0.2mm
Each car has 8 grinding heads, and the whole vehicle has 48 grinding heads in total. The minimum working curve radius of the grinding car is 180m. When the working speed is 7km/h, the metal removed every time is 0.2mm.

PGM-48钢轨打磨车配置6个集尘单元,每个单元单独成一个集尘系统,总功率为90kW。集尘系统共有三种清灰模式。压差清灰,启动清灰。停机清灰,除尘系统具备和上层模块组网通信功能,能够实现对除尘器的远程监视。
Model PGM-48 rail grinding machine is equipped with 6 dust collection units, and each unit composes an independent dust collection system, with total power of 90kW. The dust collection system is designed with three cleaning modes, i.e. d
ifferential pressure cleaning, start-up cleaning and shutdown cleaning. The dust removal system is able to develop the communication network with upper-level module and realize remote monitoring of dust collectors. 

脚注信息
pk10www.jxhy-gm.com版权所有 Copyright (C) 2014-2020 宝鸡中车时代工程机械有限公司         陕ICP备090919100-1号

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!